How to solve the problem of fat package or bulge package?

1、餐具紙箱廠將紙箱的瓦楞楞型確定為合適的楞型在A型、C型、B型瓦楞中，B型的瓦楞高度是很的，雖然耐垂直壓力性能較差，但平面壓力是很好的。紙箱采用B型瓦楞后，雖然空紙箱的抗壓強度會下降一些，但內裝物具有自支撐性，堆放時能承受一部分堆碼重量，因此產品的堆碼效果也不錯。在生產實際中，可根據具體情況選用不同的楞型。

1. Tableware carton factory determines the corrugating type of carton as the appropriate corrugating type. In a, C and B corrugating types, the corrugating height of B type is very low. Although the resistance to vertical pressure is poor, the plane pressure is very good. After the B-type corrugated box is used, although the compressive strength of the empty box will decrease a little, the contents are self-supporting and can bear part of the stacking weight when stacking, so the stacking effect of the product is also good. In practice, different types of corrugation can be selected according to specific conditions.
               

2、改進倉庫中產品的堆放條件

2. Improve the stacking condition of products in warehouse

如果倉庫庫位允許，紙箱廠盡量不要堆兩個鏟板高。如果要堆兩個鏟板高的話，為了防止成品堆碼時荷重的集中，可在堆垛中間夾上一張瓦楞紙板或是采用平面鏟板。

If the warehouse location allows, the carton factory should try not to stack two spades high. If you want to stack two spades high, in order to prevent the load concentration when stacking finished products, you can clip a corrugated board in the middle of the stacking or use a flat spade.

3.、確定準確的紙箱尺寸

3. Determine the accurate carton size

為了減少胖包或鼓包現象，體現良好的堆碼效果，紙箱廠家把紙箱箱高定為與瓶高相同，特別是對箱高相對較高的碳酸飲料紙箱和純水箱更加有必要。

In order to reduce the phenomenon of fat package or bulge package and reflect the good stacking effect, the carton manufacturers set the carton height as the same as the bottle height, especially for the carbonated beverage carton and pure water tank with relatively high carton height.