紙托盤存在的問題：
Problems with paper tray:
（1）紙托盤使用方式落后，不能完全發揮托盤的優點
(1) The use of paper tray is backward and can not give full play to the advantages of tray
紙托盤本身是為配合物流而誕生的一種單元化物流器具，可以說托盤是貫穿現代物流系統各個環節的連接點。但是在我們實際使用中由于規格不統一，造成托盤不能在物流作業鏈中流通使用，僅局限于企業內部。
The paper tray itself is a kind of unit logistics equipment, which is born to cooperate with the logistics. It can be said that the tray is the connection point throughout all aspects of the modern logistics system. But in our actual use, due to the non-uniform specifications, the pallet can not be used in the logistics operation chain, which is limited to the enterprise.
（2）受紙托盤周轉方式的制約，流通過程成本過高
(2) Restricted by the turnover mode of paper tray, the cost of circulation process is too high
從調研中可以發現，絕大多數企業的托盤都是在企業內部周轉，從而使企業的產品經過多次人工搬運裝卸，大大地降了工作效率，相應增加了產品的流通成本，從而降了產品在市場中的競爭力。
It can be found from the investigation that the pallets of the vast majority of enterprises are in the internal turnover of the enterprise, so that the products of the enterprise are manually handled for many times, which greatly reduces the work efficiency, increases the circulation cost of the products, and reduces the competitiveness of the products in the market.
（3）難以與規格接軌
(3) It is difficult to meet the international standards
由于目前托盤的規格標準不統一，使的托盤使用不能與運輸器具如通用的集裝箱等相匹配。企業為了能適應相關的運輸工具，不得不向托盤生產企業訂購與本企業周轉使用規格不一致的托盤，從而增加了企業的出口成本，降了產品的競爭力。
Due to the different specifications and standards of pallets, the pallets used in China can not match the international transport equipment such as international containers. In order to adapt to the relevant international means of transport, enterprises have to order pallets that are inconsistent with the turnover specifications of their own enterprises, thus increasing the export cost of enterprises and reducing the international competitiveness of products.
紙托盤正確使用方法
How to use paper tray correctly
1.用叉車等輔助工具時要注意平起平落，防止受力不均或是局部受力；
1. When using forklift and other auxiliary tools, pay attention to horizontal lifting and falling to prevent uneven force or local force;
2.本公司的所有產品均經過防水處理，但并不表示可以長期浸泡在水中；
2. All products of our company have been treated with waterproof treatment, but it does not mean that they can be soaked in water for a long time;
3.只允許在紙托上放置已經打包成型的貨物才可以轉運，以免托盤上的貨物散落或是局部受力過大引起紙托盤的變形和損壞；
3. Only the packaged goods are allowed to be placed on the paper tray, so as to avoid the deformation and damage of the paper tray caused by the scattered goods on the tray or excessive local stress;
4.紙托盤的腳和面板的是用膠水粘合而成，應避免局部受頓力；
4. The bottom of the paper tray and the panel are glued together to avoid local stress;
5.裝箱打包時，一定要注意托盤上的物品面積要與托盤表面積相吻合，以避免因受力不均、局部受力或者重 心偏差而導致托盤受損、坍塌；
5. When packing, we must pay attention to the bottom area of the pallet and the surface area of the pallet, so as to avoid the damage and collapse of the pallet due to uneven stress, partial stress or gravity center deviation;
采購注意：為了更好的為客戶提供優良可靠的紙托盤，我們需要了解您使用紙托盤的實際情況。如
Purchase note: in order to better provide customers with excellent and reliable paper tray, we need to know your actual situation of using paper tray. as
1.需要承載的大重量；
1. Large weight to be carried;
2.是否需要四面可以進叉車；
2. Whether it is necessary to enter the forklift from all sides;
3.腳的高度或是整個托盤的高度；
3. The height of the foot or the whole tray;
4.托盤上貨物的堆放情況或是托盤上單層紙箱的堆放情況；
4. Stacking of goods on pallets or stacking of single-layer cartons on pallets;
5.如客戶的貨物是顆粒狀和較軟的袋裝產品，要另行設計產品的擺放和承重；
5. If the customer's goods are granular and soft bagged products, the placement and bearing of the products should be designed separately;
6.紙托盤的承重和產品的擺放以樣品為準，由于個別客戶的產品規格較多，若改動貨物的尺寸和擺放，很容易導致整個托盤的受力不均。
6. The load-bearing of the paper tray and the placement of the products are subject to the samples. Due to the large number of product specifications of individual customers, if the size and placement of the goods are changed, it is easy to cause uneven stress of the whole tray.
